


These straight reducer hoses are approximately 5 inches long overall. The 60mm ID at one end and 51mm ID at the other end let you connect a 2 3/8" OD tube to a 2" OD tube. The 4-ply reinforcement results in a 5mm wall thickness (70mm / 2 3/4" and 61mm / 2 3/8" OD) and a working pressure rating over 22 psi (110 psi burst pressure). Use with our Aluminum Splicing Nipples (Part No. HJ60 and HJ51) and Lined Hose Clamps (Part No. 3613-3.00) to construct the exact bends and lengths you need.
Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to petroleum.
These straight reducer hoses are approximately 5 inches long overall. The 60mm ID at one end and 51mm ID at the other end let you connect a 2 3/8" OD tube to a 2" OD tube. The 4-ply reinforcement results in a 5mm wall thickness (70mm / 2 3/4" and 61mm / 2 3/8" OD) and a working pressure rating over 22 psi (110 psi burst pressure). Use with our Aluminum Splicing Nipples (Part No. HJ60 and HJ51) and Lined Hose Clamps (Part No. 3613-3.00) to construct the exact bends and lengths you need.
Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to petroleum.
