







These 90 degree elbows have a 2 1/8" ID with a smooth, shiny "wipe-down" finish. The 4-ply reinforcement results in a working pressure rating in excess of 35 psi and a 5mm wall thickness (64mm / 2 1/2" OD). Use our Lined Hose Clamps (Part No. 3613-2.75) to clamp this hose over a 2 1/8" OD tube. The leg lengths are measured from the centerline of the opposite leg.
Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will handle an air-fuel mixture and will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to liquid petroleum.
These 90 degree elbows have a 2 1/8" ID with a smooth, shiny "wipe-down" finish. The 4-ply reinforcement results in a working pressure rating in excess of 35 psi and a 5mm wall thickness (64mm / 2 1/2" OD). Use our Lined Hose Clamps (Part No. 3613-2.75) to clamp this hose over a 2 1/8" OD tube. The leg lengths are measured from the centerline of the opposite leg.
Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will handle an air-fuel mixture and will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to liquid petroleum.
